4. Under the vehicle, bleed each wheel, normally starting with the one farthest from the master cylinder. (The sequence may differ depending on the vehicle: see instructions in the manufacturer's manual for your vehicle). Connect a hose to the bleeder screw, loosen the bleeder screw until the flowing liquid is clean and air-free and close it again. Repeat the operation on the other wheels. (Check between each wheel the pressure on the bleeder and liquid level in the device. If necessary, activate the pump again or add new brake fluid). 5. At the end of the operation, drop the pressure in the device and the brake circuit using the relief valve on the bleeder. Disconnect the hose, remove the reservoir adapter then check the brake fluid level. Replace your fuel cap. Thanks to its European ada.
